Seco-Larm Wave-To-Open Sensor with Manual Override Button – French
The ENFORCER contactless aperture request detector uses infrared technology to allow the user to exit a protected place by an access control system simply with a hand gesture. As the function is contactless, this detector is ideal for hospitals, medical centers, laboratories, clean rooms, schools, factories, and offices. Added a manual cancel button for the SD-927PKC-NFVQ.
- Detection range up to 2-3/8″~8″ (6~20 cm)
- Single stainless steel plate
- 3A relay, adjustable by 0.5~30 seconds, rocker or as long as the hand is near the sensor
- Screwless terminal block with fast connection
- LED ring illuminated detector for easy identification.
- Selectable two-tone LED ring (from red to green, or from green to red) to indicate that the detector has been triggered.
- Adding a manual cancel button as an auxiliary device for the sensoror
Specifications:
| Operating voltage | 12~24 VAC/VDC |
| Current Draw | 120mA@12VDC |
| Relay type | Form C dry contact, 3A@24VDC |
| Override button | Switching capacity: 3A@24VDCMechanical life: 500,000 cycles |
| Response time | 10ms |
| LEDs | Standby: RedTriggered: Green |
| Output duration | Adjustable, 0.5~30 sec., toggle, or as long as sensor is triggered |
| Sensing range | Adjustable, 2-3/8″~8″ (6-20 cm) |
| Operating Temperature | -4°~131° F (-20°~55° C) |
| Dimensions | 4-1/2″ x 2-3/4″ x 1-5/16″ (115 x 70 x 33.5 mm) |
| Weight | 3.9-oz (110g) |
There are no reviews yet.