Seco-Larm Reflective Photoelectric Beam Sensor, ETL UL325 Compliant, 50ft
The ENFORCER E-931-S50RRGQ 50ft Reflective Photoelectric Beam Sensor provides reliable sensing of objects that enter the space between the sensor and reflector, thus breaking the infrared beam. It is suitable for various types of such as detection such as sensing approaching vehicles to open a garage door or outdoor gate, as an entry notification for stores, to assist in measuring parking distances, or an alarm notification, as well as many other uses.
- Up to 50ft (15m) sensing range
- Weatherproof (IP55) construction
- Anti-condensation housing
- 12-30V DC/AC 60Hz, 100mA
- Round, ø3-1/4″ (82mm) reflector
- Form C relay: 0.5A@30VAC/VDC
- Beam status LED
- N.C. Tamper switch, 500mA@30VAC/VDC
Specifications:
| Type | Reflective photoelectric beam sensor |
| Operating voltage | 12-30V DC/AC 60Hz, 100mA |
| Sensing Range | Up to 50′ (15m) |
| Current draw | Standby: 55mA@12VDC Active:40mA@12VDC |
| Reaction time | 10ms |
| Light Source | IR LED |
| LED indicators | Solid green: Good beam signal, properly aligned Alternating flash: Poor beam signal Solid red: No beam signal, triggered |
| Trigger output | SPDT Relay output (NO/NC/COM with built-in 10kΩ resistor on N.O. output) |
| Switching capacity | 0.5A@30VAC/VDC |
| Tamper switch | SPDT relay output (NO/NC/COM) |
| IP Rating | IP55 Weatherproof |
| Operating temperature | -13~140° F (-25~60° C) |
There are no reviews yet.