Seco-Larm Multi-Purpose Programmable Timer
The SA-025Q Programmable Timer Module is suitable for a wide range of timed security and access control operations. Auto-sensing of input voltage and DIP switches for programming make installation easy.
- Timer can be set from 1 second to 60 minutes
- Can be triggered via an N.O. positive (+) trigger input signal or an N.C. negative (-) trigger device or by powering up the unit
- Relay can be programmed to activate at the start or at the end of the timing cycle
- Relay can also be set to activate for one second at the end of the timing cycle
- Relay can be programmed to pulse (flash) or be steady on
- Built-in reset function to manually reset timing cycle
- Form-C relay, contact rated 10A@24VDC/250VAC
- LED indicates relay is energized
- 12~24VDC operation (auto sensing)
- Current draw – Less than 1mA (standby) or 40mA (relay energized)
- Functions programmed via DIP switches – no jumpers to cut
Specifications:
| Operating Voltage | 12~24 VDC (auto sensing) |
| Current Draw | Active:40mA@12VDC, 80mA@24VDCStandby: <1mA@12VDC, <10mA@24VDC |
| Relay contact | 1x Form C NO/NC/COM, 10A@24VDC/250VAC |
| LED Indicator | 1x, Indicates relay is triggered |
| Operating humidity | 5~95% non-condensing |
| Operating temperature | -40°~185° F (-40°~85° C) |
| Dimensions | 2-11/16″ x 3-1/4″x1-1/16″ (68 x 83×27.5 mm) |
| Weight | 3.2-oz (93g) |
There are no reviews yet.