Seco-Larm Infrared Proximity Sensor – 19mm, Stainless steel
ENFORCER IR Proximity Sensors are compact and can be programmed to unlock an electronic lock when an object (such as a hand) passes in range of the sensor or trigger an alarm when an object is removed from the sensing area making them useful for both anti-theft and access control.
- No-touch reduces the risk of spread of germs, viruses, etc., through cross-contamination
- Triggers a warning or locking device when the sensor is triggered
- Form C relay output (1A@30VDC), adjustable output duration (0.5~30 s) or toggle
- Adjustable sensor range, up to 7″ (18cm)
- Selectable LED colors (turns from red to green or green to red on activation)
- 12~24 VDC Operation
- Filters out interference from other infrared sources
- Weatherproof front panel (IP65)*
- Power must be provided by low-voltage power-limited/Class 2 power supply
- Use only low-voltage field wiring and do not exceed 98.5 ft (30m)
* Weatherproof when properly installed
Specifications:
| Diameter | ø3/4″ (ø19mm) |
| Case Material | Stainless steel and polycarbonate |
| Operating Voltage | 12~24 VDC |
| Current draw (max. ±10%) | Standby red (12/24 VDC): 14mA / 18mATriggered green (12/24 VDC): 20mA / 26mA |
| Relay Type | Form C dry contact, NO/NC/COM, 1A@30VDC |
| Connectors | Wire terminals |
| Response time | 10ms |
| Output duration | 0.5~30 Seconds or toggle |
| Sensing range | 2″~7″ (5~18 cm) |
| LED Indicator (standby/triggered) | Red/green |
| Operating life | Relay: 1,000,000 cyclesSensor: 100,000 Hours |
| IP Rating | IP65 (front panel only) |
| Operating temperature | 4°~131° F (-20°~55° C) |
| Destructive attack level | Level I |
| Line security | Level I |
| Endurance level | Level IV |
| Standby power | Level I |
There are no reviews yet.